Vaping is a popular way to quit smoking. A vape kit is manufactured from different components. A vape tank is one of the essential parts of the vape device. To maintain the tank in good condition, you need to clean and maintain them properly. Replacing coils in your Aspire vape tank is an important maintenance task that ensures optimal performance and prolongs the lifespan of your tank. This step-by-step guide will walk you through replacing coils in your Aspire vape tank.
Gather Your Supplies:
Before you begin, you will need to gather the necessary supplies. You will need a new coil for your vape tank, a paper towel, and a pair of tweezers.
Disassemble Your Vape Tank:
The first step is to disassemble your vape tank. Depending on the model of your Aspire vape tank, you may need to unscrew the top cap or the bottom of the tank. Once you have disassembled the Aspire vape tank, remove the old coil from the tank’s base.
Clean Your Vape Tank:
Cleaning your vape tank is essential to ensure it functions properly and provides a smooth and flavorful experience. Here are the steps to clean your vape tank:
- Disassemble Your Vape Tank: Your tank must be disassembled first. You should unscrew the bottom of the tank or the top cap, depending on the model of your tank.
- Soak the Components in Warm Water: Fill a bowl with warm water and soak the components of your vape tank, including the tank itself, the drip tip, and the base. This will help loosen any residual e-liquid or debris.
- Scrub the Components: Use a soft-bristled brush or a toothbrush to scrub the components of your vape tank. Be gentle but thorough, making sure to remove any stubborn residue.
- Rinse and Dry the Components: Once you have scrubbed the components, rinse the Aspire vape tank thoroughly with water and dry them with a paper towel or a clean cloth. Make sure all the components are dehydrated before reassembling your tank.
Install The New Coil:
Take the new coil and screw it into the base of the vape tank. Ensure it is tightened snugly, but be careful not to over-tighten it.
Prime Your Coil
Priming a coil is crucial when replacing a coil or using a new tank for the first time. Priming ensures that the cotton wick in the coil is fully saturated with e-liquid, which helps prevent dry hits and provides a smooth vaping experience. Here are the steps to prime a coil:
- Add a Few Drops of E-Liquid to the Coil: Before installing the coil, add a few drops of e-liquid to the exposed cotton wick on the coil. This will help saturate the wick and prepare it for use.
- Fill Your Tank with E-Liquid: After adding e-liquid to the coil, fill your tank with e-liquid. This will help the coil absorb e-liquid and ensure it is fully saturated.
- Let the Coil Sit for a Few Minutes: After filling your tank with e-liquid, let the coil sit for a few minutes to allow the e-liquid to saturate the cotton wick.
Reassemble Your Vape Tank
Once your new coil is primed, reassemble your vape tank. First, make sure all the components are securely fastened and tightened. Then, fill your tank with e-liquid and let it sit for a few minutes to allow the e-liquid to saturate the coil.
Test Your Vape Tank
After reassembling your vape tank, test it to ensure it works properly. Take a few puffs and check for any issues, such as leaking, gurgling, or a burnt taste. If you experience any issues, disassemble your Aspire vape tank and troubleshoot the problem.
Replacing coils in your Aspire vape tank is a simple but essential maintenance task that ensures optimal performance and extends the lifespan of your tank. By following these step-by-step instructions, you can easily replace the coils in your Aspire vape tank and enjoy a smooth and satisfying vaping experience. Always use high-quality coils and e-liquids to ensure the best possible performance from your vape tank.
Leave a Reply